Skip to content
教程指南意图:信息学习栏目:Clash 客户端发布:2026-11-20更新:2026-11-20

Clash Verge Rev 配合 WSL2、Docker 与 Git 终端代理配置 ​

直接结论 · Answer-First

在 Windows 上让 Git、Docker 与 WSL2 顺畅走 Clash Verge Rev 代理,最现代的做法有三招:1. Windows 11 22H2+ 为 WSL2 开启 networkingMode=mirrored 镜像网络自动直连宿主机 127.0.0.1:7897;2. Docker Desktop 在 Settings → Proxies 显式填写代理端口;3. 日常开发直接开启 Service Mode + TUN 模式一劳永逸。

适用环境:Windows 10/11 + WSL2 / Docker Desktop / Git Bash / PowerShell · 核实日期:2026-11-20

一、开发工具代理方案快速决策矩阵 ​

工具环境方案 1:仅开 TUN 模式是否够用方案 2:不用 TUN 时的显式直指写法推荐度最高做法
PowerShell / CMD是$env:HTTPS_PROXY="http://127.0.0.1:7897"TUN 或临时变量
Git(仅加速 GitHub)是git config --global http.https://github.com.proxy http://127.0.0.1:7897按域名定向配 Git 代理最不影响内网
Docker Desktop视 WSL 后端设置而定Settings → Resources → Proxies 填 http://127.0.0.1:7897建议在 Docker 设置显式填写 + Bypass
WSL2 (Win11 22H2+)Mirrored 模式下极佳.wslconfig 配 networkingMode=mirrored + autoProxy=true微软原生镜像网络模式
WSL2 (Windows 10 老 NAT)需配合防火墙放行Clash 开 允许局域网 (Allow LAN) + 指向宿主机网关 IP升级 Win11 或加防火墙入站规则

二、Git 与 PowerShell / npm / pip 精细代理 ​

1. Git 推荐写法(只让 GitHub 走代理,绝不影响公司内网 GitLab) ​

与其全局把所有 Git 仓库塞进代理导致内网 gitlab.corp 报错,不如按域名前缀精准挂载代理:

bash
# 仅针对 GitHub 走 Clash Verge 默认混合端口 7897(内网/国内仓库保持直连)
git config --global http.https://github.com.proxy http://127.0.0.1:7897
git config --global https.https://github.com.proxy http://127.0.0.1:7897

# 若使用 Git SSH (ssh://git@github.com) 被阻断,可加进 ~/.ssh/config 走 443 + HTTP 代理:
# Host github.com
#   Hostname ssh.github.com
#   Port 443
#   ProxyCommand connect -H 127.0.0.1:7897 %h %p

2. PowerShell 当前会话代理函数(放进 $PROFILE 随叫随用) ​

powershell
function proxy-on {
  $env:HTTP_PROXY = "http://127.0.0.1:7897"
  $env:HTTPS_PROXY = "http://127.0.0.1:7897"
  $env:ALL_PROXY = "socks5://127.0.0.1:7897"
  Write-Host "Shell proxy -> 127.0.0.1:7897" -ForegroundColor Green
}

function proxy-off {
  Remove-Item Env:HTTP_PROXY, Env:HTTPS_PROXY, Env:ALL_PROXY -ErrorAction SilentlyContinue
  Write-Host "Shell proxy cleared" -ForegroundColor Yellow
}

三、WSL2 完整配置(Win11 Mirrored 首选 vs Win10 NAT 兼容) ​

方案 A(推荐 · Windows 11 22H2+):开启 Mirrored 镜像网络 ​

在 Windows 当前用户目录 C:\Users\<你的用户名>\.wslconfig 新建或追加以下内容:

ini
[wsl2]
networkingMode=mirrored
dnsTunneling=true
autoProxy=true

保存后在 PowerShell 运行 wsl --shutdown 彻底重启 WSL,再次进入 Ubuntu 后执行测试:

bash
# 检查自动同步到的宿主机代理变量与 127.0.0.1 互通情况
echo $HTTP_PROXY
curl -I https://www.google.com

方案 B(Windows 10 / 传统 NAT 架构) ​

Windows 10 NAT 下 WSL2 处于独立子网,无法直接把 127.0.0.1 指回宿主机:

  1. 在 Clash Verge Rev「设置」打开 允许局域网(Allow LAN);
  2. 用管理员 PowerShell 允许 WSL 虚拟网卡访问宿主端口,避免 Windows 防火墙静默拦截:
    powershell
    New-NetFirewallRule -DisplayName "WSL Clash Proxy" -Direction Inbound -InterfaceAlias "vEthernet (WSL)" -Action Allow
  3. 在 WSL2 ~/.bashrc 或当前终端获取宿主机网关 IP 并导出代理:
    bash
    export HOST_IP=$(ip route show | grep -i default | awk '{ print $3}')
    export http_proxy="http://${HOST_IP}:7897"
    export https_proxy="http://${HOST_IP}:7897"

四、Docker Desktop 与原生 Linux dockerd 镜像拉取代理 ​

1. Windows / macOS Docker Desktop ​

打开 Docker Desktop → Settings → Resources → Proxies → 开启 Manual proxy configuration:

  • Web Server (HTTP):http://127.0.0.1:7897
  • Secure Web Server (HTTPS):http://127.0.0.1:7897
  • Bypass proxy settings for these hosts & domains:localhost,127.0.0.1,*.local
  • 点击 Apply & Restart。

2. 原生 Linux 服务器或 WSL 内独立 Docker Engine (systemd) ​

注意在容器构建阶段(docker build)如果还要走代理,仅仅靠环境变量不够,拉取镜像走的是 dockerd 守护进程,需创建 /etc/systemd/system/docker.service.d/http-proxy.conf:

ini
[Service]
Environment="HTTP_PROXY=http://127.0.0.1:7897"
Environment="HTTPS_PROXY=http://127.0.0.1:7897"
Environment="NO_PROXY=localhost,127.0.0.1,docker.mirrors.internal"

随后执行 sudo systemctl daemon-reload && sudo systemctl restart docker 重载生效。


五、常见问题(FAQ) ​

开发与容器代理 FAQ

Windows 11 下让 WSL2 走代理,用 Mirrored 镜像模式还是传统 NAT + Allow LAN 好?
Windows 11 22H2+ 强烈推荐使用官方 networkingMode=mirrored(镜像网络模式)并配合 autoProxy=true,WSL2 可以直接访问宿主机 127.0.0.1:7897 且不用开允许局域网和改复杂防火墙规则;仅老版本 Windows 10 才需退回传统 NAT + Allow LAN。
为什么已经在 Clash Verge 开了系统代理,git clone 和 docker pull 还是超慢或 Connection timed out?
Git 与 Docker 守护进程默认不会主动读取 Windows 用户态的 IE/WinINet 系统代理设置。Git 需要单独设 http.proxy,Docker Desktop 需要在 Settings → Resources → Proxies 填入 127.0.0.1:7897(或者直接开启 Clash Verge TUN 模式)。
开启了 TUN 模式之后,WSL2 还是连接不到外网怎么办?
检查两个位置:1. 确保 Clash Verge 的 TUN 配置启用了 DNS 劫持和 Auto Route;2. 若 WSL2 在传统 NAT 模式下把 DNS 设死向宿主机虚拟网关却被 Windows 防火墙拦截了 UDP 53 入站,建议切回 Mirrored 模式并开启 dnsTunneling=true。
配置了 Git 代理后如何临时访问国内 Gitee 或公司内网 GitLab 不绕远?
使用 git config --global http.https://github.com.proxy http://127.0.0.1:7897 仅针对 GitHub 指定域名走代理,其余内网与国内仓库天然直连!